CONFIGURE YOUR OWN CUSTOM DRAWER CABINETS (STANDARD DEPTH 28.5")
|
Use our step-by-step guide to configure your custom drawer cabinets:
1. Select Your Cabinet Housing 2. Select Your Lock and Key System 3. Select Your Base 4. Select Your Top 5. Select Your Drawers 6. Select Your Colors |
|
Sample Cabinet Order
Quantity Part No. Desscription 1 SW1800 Standard Width Housing 1 IL Individual Lock 1 SW-FB4 4" Tall Frame Base 1 SW1BBT Butcher Block Top 2 SW250H Drawer Assembly 2 SW400H Drawer Assembly 2 SW500H Drawer Assembly Color BB Bright Blue Note: Total points for the combined drawers cannot exceed the housing points. (2) 250 drawers = 500 (2) 400 drawers = 800 (1) 500 drawer = 500 Total Drawer Points Used= 1800 Housing points = 1800 |
|
STANDARD DEPTH (28.5") HOUSING WIDTHS
STANDARD DEPTH (28.5") HOUSING HEIGHTS
STANDARD DEPTH (28.5") HOUSING PART NUMBERS
POINTS |
OVERALL HEIGHT |
LW |
NW |
SW |
SWP |
EW |
DW |
600 |
15-3/4" |
LW600 |
NW600 |
SW600 |
SWP600 |
EW600 |
DW600 |
900 |
21-5/8" |
LW900 |
NW900 |
SW900 |
SWP900 |
EW900 |
DW900 |
1200 |
27-1/2" |
LW1200 |
NW1200 |
SW1200 |
SWP1200 |
EW1200 |
DW1200 |
1500 |
33-1/2" |
LW1500 |
NW1500 |
SW1500 |
SWP1500 |
EW1500 |
DW1500 |
1800 |
39-3/8" |
LW1800 |
NW1800 |
SW1800 |
SWP1800 |
EW1800 |
DW1800 |
2100 |
45-1/4" |
- |
NW2100 |
SW2100 |
SWP2100 |
EW2100 |
DW2100 |
2700 |
57-1/8" |
- |
- |
SW2700 |
SWP2700 |
EW2700 |
DW2700 |
3050 |
64" |
- |
- |
SW3050 |
SWP3050 |
EW3050 |
DW3050 |
LOCK AND KEY OPTIONS
|
|
IL |
Individual Lock |
All cabinets come standard with individual lock and 2 keys per cabinet. |
NL |
No Lock |
No cylinder lock is included. Cabinet includes our AntiTip one drawer at a time safety feature. |
KA |
Keyed Alike |
All cabinets have individual locks, each with 2 keys. All Keys work in all cabinets. |
MA |
Master Alike |
Each cabinet has a different Lock, each with 2 keys. (MK) Must be ordered as well, this opens each cabinet in the MA group. |
LB |
Lock Bar |
Hinged lock bar is added to accept standard padlock (not included). No cylinder lock is included. Cabinet includes AntiTip one drawer at a time safety feature. |
PC |
Proxy Card |
Allows for audit trail reporting (last 1500 access attempts) and up to 250 unique ID codes to be entered. It is a keyless system – there are NO keys to lose or share. The eLocks can be programmed to read a facility's existing employee identification cards using HID proximity, HID iCLASS proximity, or magnetic card credentials. |
STANDARD DEPTH (28.5") BASES
DESCRIPTION |
HGT |
LOAD |
LW HSG |
NW HSG |
SW HSG |
SWP HSG |
EW HSG |
DW HSG |
|
Fork Truck Base |
Steel fork truck bases allow the cabinet to be moved with a fork truck when fully loaded. Simply remove the snap in place front panel to allow the fork truck to go under. Bases are pre punched to allow stacking. |
2" |
- |
- |
- |
SW-FTB |
SWP-FTB |
EW-FTB |
DW-FTB |
Pallet Truck Base |
Steel pallet truck bases allow the cabinet to be moved with a pallet truck when fully loaded. Simply remove the snap in place front panel to allow the pallet truck to go under. Bases are pre punched to allow stacking. |
4" |
- |
- |
- |
SW-PTB |
SWP-FTB |
EW-FTB |
DW-FTB |
Frame Base - 2" |
Steel bases are used to bring cabinets up to the desired work height. Bases are recessed from the front of the cabinet 1.125" |
2" |
- |
LW-FB2 |
NW-FB2 |
SW-FB2 |
SWP-FB2 |
EW-FB2 |
DW-FB2 |
Frame Base - 4" |
Steel bases are used to bring cabinets up to the desired work height. Bases are recessed from the front of the cabinet 1.125" |
4" |
- |
LW-FB4 |
NW-FB4 |
SW-FB4 |
SWP-FB4 |
EW-FB4 |
DW-FB4 |
Frame Base - 6" |
Steel bases are used to bring cabinets up to the desired work height. Bases are recessed from the front of the cabinet 1.125" |
6" |
- |
LW-FB6 |
NW-FB6 |
SW-FB6 |
SWP-FB6 |
EW-FB6 |
DW-FB6 |
Leg Base |
Leg bases allow easy cleaning and access below the housing. The leg base raises the housing 4.5" above the floor and is adjustable for uneven floor surfaces. Cabinet housing can also be moved with a pallet truck or forklift. |
4.5" |
2400 lb. |
LW-LB |
NW-LB |
SW-LB |
SWP-LB |
EW-LB |
DW-LB |
Mobile Base |
Mobile bases come with (2) 4" x 2" standard fixed casters and two locking swivel casters. Not available for units 2100 or taller. |
6" |
2400 lb. |
- |
NW-MB6 |
SW-MB6 |
SWP-MB6 |
EW-MB6 |
DW-MB6 |
Mobile Base |
Mobile bases come with (2) 6" x 2" standard fixed casters and two locking swivel casters. Not available for units 2100 or taller. |
8" |
2400 lb. |
- |
NW-MB8 |
SW-MB8 |
SWP-MB8 |
EW-MB8 |
DW-MB8 |
Fork Truck Base
|
Pallet Truck Base
|
Frame Base
|
Leg Base
|
Mobile Base
|
STANDARD DEPTH (28.5") CABINET TOPS
No. of Cabinets |
LW Housing |
NW Housing |
SW Housing |
SWP Housing |
EW Housing |
DW Housing |
|
Butcher Block |
1 |
LW1BBT |
NW1BBT |
SW1BBT |
SWP1BBT |
EW1BBT |
DW1BBT |
Butcher Block |
2 |
LW2BBT |
NW2BBT |
SW2BBT |
SWP2BBT |
EW2BBT |
DW2BBT |
Plastic Laminate |
1 |
LW1PLT |
NW1PLT |
SW1PLT |
SWP1PLT |
EW1PLT |
DW1PLT |
Plastic Laminate |
2 |
LW2PLT |
NW2PLT |
SW2PLT |
SWP2PLT |
EW2PLT |
DW2PLT |
Phenolic Resin |
1 |
LW1PHT |
NW1PHT |
SW1PHT |
SWP1PHT |
EW1PHT |
DW1PHT |
Phenolic Resin |
2 |
LW2PHT |
NW2PHT |
SW2PHT |
SWP2PHT |
- |
- |
Stainless Steel |
1 |
LW1SST |
NW1SST |
SW1SST |
SWP1SST |
EW1SST |
DW1SST |
Stainless Steel |
2 |
LW2SST |
NW2SST |
SW2SST |
SWP2SST |
EW2SST |
- |
Retainer Top |
1 |
LW1RT |
NW1RT |
SW1RT |
SWP1RT |
EW1RT |
DW1RT |
Retainer Top |
2 |
LW2RT |
NW2RT |
SW2RT |
SWP2RT |
EW2RT |
- |
|
Butcher Block Tops
Tops are 1.625" thick, flush to the sides, front, and back. Light gray is standard. Perfect for electronic assembly and packing stations, or almost any work surface! |
|
Stainless Steel Tops are fitted over a wood core base and are 1-9/16" thick. Tops are hand crafted 16-gauge, type 304, #4 finish stainless steel with wrapped and welded corners. Optional sink cut-outs and trash cut outs as well as front drip edges available upon request.
|
|
Plastic Laminate Tops are 1.625" thick, flush to the sides, front, and back. Light gray is standard. Perfect for electronic assembly and packing stations, or almost any work surface!
|
|
Retainer tops have a raised edge of 3/4" on both sides and the back and are flush to the sides, back, and front. A rubber mat is included for the work surface.
|
|
Phenolic Resin Tops are 1" thick, flush to the sides, front, and back. Black is standard. With high resistance to chemicals, humidity, scratching and abrasion, our phenolic resin and cellulose fiber composite provides the perfect surface for laboratory tops
|
DRAWER SIZES
Full visibility and access to our drawers is achieved with full extension slides. This allows complete access to all contents with ease. Each drawer has a maximum load capacity of either 440 Lbs. All Standard Depth Cabinets (28-1/2" Deep) have full depth drawers at 24-1/16" with full extension.
LW |
NW |
SW |
SWP |
EW |
DW |
|||
220 Lb. Capacity |
440 Lb. Capacity |
440 Lb. Capacity |
440 Lb. Capacity |
440 Lb. Capacity |
440 Lb. Capacity |
|||
Useable Height |
Usable Height Points |
Sidewall Height |
Interior Width 12 - 11/16" |
Interior Width 18" |
Interior Width 24 - 1/16" |
Interior Width 36 - 1/16" |
Interior Width 42-13/16" |
Interior Width 52 - 5/16" |
2 - 1/8" |
150 |
1 - 7/8" |
LW150H |
NW150H |
SW150H |
SWP150H |
EW150H |
DW150H |
3 - 1/8" |
200 |
2 - 7/8" |
LW200H |
NW200H |
SW200H |
SWP200H |
EW200H |
DW200H |
4 - 1/8" |
250 |
3 - 7/8" |
LW250H |
NW250H |
SW250H |
SWP250H |
EW250H |
DW250H |
5 - 1/8" |
300 |
4 - 7/8" |
LW300H |
NW300H |
SW300H |
SWP300H |
EW300H |
DW300H |
6 - 1/8" |
350 |
5 - 7/8" |
LW350H |
NW350H |
SW350H |
SWP350H |
EW350H |
DW350H |
7 - 1/8" |
400 |
6 - 7/8" |
LW400H |
NW400H |
SW400H |
SWP400H |
EW400H |
DW400H |
8 - 1/8" |
450 |
7 - 7/8" |
LW450H |
NW450H |
SW450H |
SWP450H |
EW450H |
DW450H |
9 - 1/16" |
500 |
8 - 3/4" |
LW500H |
NW500H |
SW500H |
SWP500H |
EW500H |
DW500H |
10 - 1/16" |
550 |
9 - 3/4" |
LW550H |
NW550H |
SW550H |
SWP550H |
EW550H |
DW550H |
11 - 1/16" |
600 |
10 - 3/4" |
LW600H |
NW600H |
SW600H |
SWP600H |
EW600H |
DW600H |
12 - 1/16" |
650 |
11 - 3/4" |
LW650H |
NW650H |
SW650H |
SWP650H |
EW650H |
DW650H |
13 |
700 |
12 - 11/16" |
LW700H |
NW700H |
SW700H |
SWP700H |
EW700H |
DW700H |
14 |
750 |
13 - 11/16" |
LW750H |
NW750H |
SW750H |
SWP750H |
EW750H |
DW750H |
15 |
800 |
14 - 11/16" |
LW800H |
NW800H |
SW800H |
SWP800H |
EW800H |
DW800H |
STANDARD DEPTH DRAWER LAYOUT KITS
|
|
|
|
|
|
Drawer Interior width 12-5/8" x 24-1/16"
To order drawer interior sets, use the part number indicated plus the drawer height to be installed (set LWDK-4 for a Model 150 drawer height is ordered “LWDK-4-150”). Drawer heights are shown in the table below.1502002503003504004505005506006507007508002-1/8"3-1/8"4-1/8"5-1/8"6-1/8"7-1/8"8-1/8"9-1/16"10-1/16"11-1/16"12-1/16"13"14"15"
LWDK - 4
COMPT. WIDTH - 6-1/4"
NO. OF COMPTS. - 4
AVAILABLE HT - 150 - 500
LWDK - 6
COMPT. WIDTH - 6-1/4"
NO. OF COMPTS. - 8
AVAILABLE HT - 150 - 400
LWDK - 8
COMPT. WIDTH - 6-1/4"
NO. OF COMPTS. - 8
AVAILABLE HT - 150 - 400
LWDK - 9
COMPT. WIDTH - (6)4.25,(3)-4
NO. OF COMPTS. - 9
AVAILABLE HT - 150 - 300
LWDK - 12
COMPT. WIDTH - (8)4.25,(4)-4
NO. OF COMPTS. - 12
AVAILABLE HT - 150 - 300
LWDK - 16
COMPT. WIDTH - (12)4.25,(6)-4
NO. OF COMPTS. - 16
AVAILABLE HT - 150 - 300Drawer Interior width 18" x 24-1/16"
To order drawer interior sets, use the part number indicated plus the drawer height to be installed (set NWDK-4 for a Model 150 drawer height is ordered “NWDK-4-150”). Drawer heights are shown in the table below.1502002503003504004505005506006507007508002-1/8"3-1/8"4-1/8"5-1/8"6-1/8"7-1/8"8-1/8"9-1/16"10-1/16"11-1/16"12-1/16"13"14"15"
NWDK - 4
COMPT. WIDTH - 8-7/8"
NO. OF COMPTS. - 4
AVAILABLE HT - 150 - 550
NWDK - 6
COMPT. WIDTH - 8-7/8"
NO. OF COMPTS. - 6
AVAILABLE HT - 150 - 550
NWDK - 8
COMPT. WIDTH - 8-7/8"
NO. OF COMPTS. - 8
AVAILABLE HT - 150 - 550
NWDK - 9
COMPT. WIDTH - 5-7/8"
NO. OF COMPTS. - 9
AVAILABLE HT - 150 - 450
NWDK - 12
COMPT. WIDTH - 5-7/8"
NO. OF COMPTS. - 12
AVAILABLE HT - 150 - 450
NWDK - 16
COMPT. WIDTH - 4-3/8"
NO. OF COMPTS. - 16
AVAILABLE HT - 150 - 350
NWDK - 20
COMPT. WIDTH - 4-3/8"
NO. OF COMPTS. - 20
AVAILABLE HT - 150 - 350
NWDK - 24
COMPT. WIDTH - 4-3/8"
NO. OF COMPTS. - 24
AVAILABLE HT - 150 - 300Drawer Interior width 24-1/16" x 24-1/16"
To order drawer interior sets, use the part number indicated plus the drawer height to be installed (set SWDK-4 for a Model 150 drawer height is ordered “SWDK-4-150”). Drawer heights are shown in the table below.1502002503003504004505005506006507007508002-1/8"3-1/8"4-1/8"5-1/8"6-1/8"7-1/8"8-1/8"9-1/16"10-1/16"11-1/16"12-1/16"13"14"15"
SWDK - 4
COMPT. WIDTH - 11-7/8"
NO. OF COMPTS. - 4
AVAILABLE HT - 150 - 800
SWDK - 6
COMPT. WIDTH - 7-7/8"
NO. OF COMPTS. - 6
AVAILABLE HT - 150 - 800
SWDK - 9
COMPT. WIDTH - 7-7/8"
NO. OF COMPTS. - 9
AVAILABLE HT - 150 - 800
SWDK - 12
COMPT. WIDTH - 7-7/8"
NO. OF COMPTS. - 12
AVAILABLE HT - 150 - 800
SWDK - 16
COMPT. WIDTH - 5-7/8"
NO. OF COMPTS. - 16
AVAILABLE HT - 150 - 800
SWDK - 18
COMPT. WIDTH - 3-7/8"
NO. OF COMPTS. - 18
AVAILABLE HT - 150 - 450
SWDK - 20
COMPT. WIDTH - 5-7/8"
NO. OF COMPTS. - 20
AVAILABLE HT - 150 - 450
SWDK - 24
COMPT. WIDTH - 3-7/8"
NO. OF COMPTS. - 24
AVAILABLE HT - 150 - 450
SWDK - 30
COMPT. WIDTH - 3-7/8"
NO. OF COMPTS. - 30
AVAILABLE HT - 150 - 300
SWDK - 36
COMPT. WIDTH - 3-7/8"
NO. OF COMPTS. - 36
AVAILABLE HT - 150 - 300
SWDK - 48
COMPT. WIDTH - 3-7/8"
NO. OF COMPTS. - 48
AVAILABLE HT - 150 - 250Drawer Interior width 36-1/16" x 24-1/16"
To order drawer interior sets, use the part number indicated plus the drawer height to be installed (set SWPDK-4 for a Model 150 drawer height is ordered “SWPDK-4-150”). Drawer heights are shown in the table below.1502002503003504004505005506006507007508002-1/8"3-1/8"4-1/8"5-1/8"6-1/8"7-1/8"8-1/8"9-1/16"10-1/16"11-1/16"12-1/16"13"14"15"
SWPDK - 4
COMPT. WIDTH - 9"
NO. OF COMPTS. - 4
AVAILABLE HT - 150 - 800
SWPDK - 6
COMPT. WIDTH - 11-7/8"
NO. OF COMPTS. - 6
AVAILABLE HT - 150 - 800
SWPDK - 9
COMPT. WIDTH - 11-7/8"
NO. OF COMPTS. - 9
AVAILABLE HT - 150 - 800
SWPDK - 12
COMPT. WIDTH - 11-7/8"
NO. OF COMPTS. - 12
AVAILABLE HT - 150 - 800
SWPDK - 16
COMPT. WIDTH - 8-7/8"
NO. OF COMPTS. - 16
AVAILABLE HT - 150 - 450
SWPDK - 20
COMPT. WIDTH - 8-7/8"
NO. OF COMPTS. - 20
AVAILABLE HT - 150 - 450
SWPDK - 24
COMPT. WIDTH - 5-7/8"
NO. OF COMPTS. - 24
AVAILABLE HT - 150 - 450
SWPDK - 30
COMPT. WIDTH - 5-7/8"
NO. OF COMPTS. - 30
AVAILABLE HT - 150 - 350
SWPDK - 36
COMPT. WIDTH - 5-7/8"
NO. OF COMPTS. - 36
AVAILABLE HT - 150 - 350
SWPDK - 48
COMPT. WIDTH - 5-7/8"
NO. OF COMPTS. - 48
AVAILABLE HT - 150 - 300Drawer Interior width 42-13/16" x 24-1/16"
To order drawer interior sets, use the part number indicated plus the drawer height to be installed (set EWPDK-4 for a Model 150 drawer height is ordered “EWPDK-4-150”). Drawer heights are shown in the table below.1502002503003504004505005506006507007508002-1/8"3-1/8"4-1/8"5-1/8"6-1/8"7-1/8"8-1/8"9-1/16"10-1/16"11-1/16"12-1/16"13"14"15"
EWDK - 3
COMPT. WIDTH - 14"
NO. OF COMPTS. - 3
AVAILABLE HT - 150 - 800
EWDK - 4
COMPT. WIDTH - 10-1/2"
NO. OF COMPTS. - 4
AVAILABLE HT - 150 - 800
EWDK - 8
COMPT. WIDTH - (4)10-7/8"(4)10-1/2"
NO. OF COMPTS. - 8
AVAILABLE HT - 150 - 600
EWDK - 9
COMPT. WIDTH - (6)14-3/8"(3)14"
NO. OF COMPTS. - 9
AVAILABLE HT - 150 - 600
EWDK - 12
COMPT. WIDTH - (6)10-7/8"(6)10-1/2"
NO. OF COMPTS. - 12
AVAILABLE HT - 150 - 550
EWDK - 16
COMPT. WIDTH - (8)10-7/8"(8)10-1/2"
NO. OF COMPTS. - 16
AVAILABLE HT - 150 - 550
EWDK - 28
COMPT. WIDTH - (8)6-3/8"(16)6"
NO. OF COMPTS. - 28
AVAILABLE HT - 150 - 500
EWDK - 32
COMPT. WIDTH - (8)4-7/8"(24)5-3/8"
NO. OF COMPTS. - 32
AVAILABLE HT - 150 - 400
EWDK - 36
COMPT. WIDTH - (6)3-13/16"(28)4-7/8"
NO. OF COMPTS. - 36
AVAILABLE HT - 150 - 400
EWDK - 40
COMPT. WIDTH - (8)4-7/8"(24)5-3/8"
NO. OF COMPTS. - 40
AVAILABLE HT - 150 - 400Drawer Interior width 52-5/16" x 24-1/16"
To order drawer interior sets, use the part number indicated plus the drawer height to be installed (set DWPDK-3 for a Model 150 drawer height is ordered “DWPDK-3-150”). Drawer heights are shown in the table below.1502002503003504004505005506006507007508002-1/8"3-1/8"4-1/8"5-1/8"6-1/8"7-1/8"8-1/8"9-1/16"10-1/16"11-1/16"12-1/16"13"14"15"
DWDK - 3
COMPT. WIDTH - 17-1/2"
NO. OF COMPTS. - 3
AVAILABLE HT - 150 - 800
DWDK - 4
COMPT. WIDTH - 13"
NO. OF COMPTS. - 4
AVAILABLE HT - 150 - 800
DWDK - 8
COMPT. WIDTH - 13"
NO. OF COMPTS. - 8
AVAILABLE HT - 150 - 600
DWDK - 12
COMPT. WIDTH -13"
NO. OF COMPTS. - 12
AVAILABLE HT - 150 - 550
DWDK - 16
COMPT. WIDTH -13"
NO. OF COMPTS. - 16
AVAILABLE HT - 150 - 550
DWDK - 28
COMPT. WIDTH - (24)7-7/16"(4)7-1/8"
NO. OF COMPTS. - 28
AVAILABLE HT - 150 - 500
DWDK - 32
COMPT. WIDTH - 6-1/2"
NO. OF COMPTS. - 32
AVAILABLE HT - 150 - 400
DWDK - 40
COMPT. WIDTH - 6-1/2"
NO. OF COMPTS. - 40
AVAILABLE HT - 150 - 400
COLORS
|
Add your own style to your work space.
Champion Tool Storage offers an entire palette of colors for you to customize your box. You can choose different colors for the housing and drawers for a distinctive two-tone color scheme. If you don’t see the color you are looking for please contact us for custom colors. All Champion Tool Storage products feature a high-quality, durable powder coat finish that is smooth, uniform and attractive. It’s a virtually pollution-free process that's environmentally friendly. As you view colors, keep in mind that color calibration can vary considerably from monitor to monitor. If color accuracy or matching are key to your decision, call our customer service department at 866-391-4200 to request a paint color chip. |
|
|
|
|
|
|
|
|
|
|
|
|
|
